- Test your firewood is fully seasoned
- Measure the moisture content of any wood
- Burning fully seasoned wood generates more heat & reduces chimney deposits & environmental pollution
Use the Moisture Meter to test that your firewood is fully seasoned. Then enjoy a fire with less smoke, reduced chimney deposits and lower environmental pollution.
Fuel quality is the single most important aspect of making a successful fire. To burn effectively the moisture content of firewood needs to be less than 20%, whether it be an open fire or in a stove.
Burning wet wood or unseasoned, freshly felled or green wood causes;
• Heavy soot and tar build up in a chimney or liner
• Smokey chimneys
• Lower heat output
• Potentially corrosive acids in the chimney flue
• Increased likelihood of chimney fire
• Difficulty in getting the fire to burn
• Lower draw on chimneys causing smoke to enter the room
• Dirty stove glass with tar and creosote deposits
• Detrimental effects on the environment
The burning of low grade fuel can also invalidate warranties of expensive stainless steel chimney liners.
Freshly felled timber has a moisture content of between 30 and 60%, depending on the type of wood. All wood should be split and stored under cover from the rain and open to wind and sun so it can dry for at least one year, preferably two.
The Valiant Moisture Meter can also be used in timber, floors and buildings in order to detect and measure moisture content.
Requires 1 x PP3 battery Alkaline or zinc/carbon
(Please dispose of exhausted batteries and electronic products at a licenced recycle centre and not as ordinary household waste.)
191 x 110 x 45mm