The SYSTEMSURE IK6 injector is equally as effective when injecting chemicals into sealed systems, removing the need to repressurise a system after injection of chemicals.
It is supplied complete with two special nickel plated steel air bleed valve adapters for the most common radiator bleed valve sizes, and a 1/2" BSP threaded filling loop adaptor. This enables the IK6 to inject chemicals directly into a system through a standard filling loop, or into radiators through an upper 1/2" BSP plug when bleed screw threads are non standard.
By using the filling loop adaptor, flushing chemicals may be injected straight into the primary pipe work so that they will reach a partial blockage faster than if added via a radiator.
The IK6 has a 4 litre capacity tank, enabling it to be used to add chemicals to larger heating systems with one operation. The Systemsure IK6 may also be used for spray application of chemicals. It is constructed of thermoplastic materials suited for use with a wide range of industrial chemicals, including acids, and may be used for cleaning, disinfecting and degreasing.
The IK6 sprayer/injector includes an adjustable nozzle, a spray lance incorporating easy action on / off valve and integral filter. The see-through tank has a visible filling level scale, an external safety valve with red over-pressure indicator, and clip for the lance.
Max pressure: 3 bar / 42 psi
Flow rate at 3 bar: 0.50 lt/min
Standard lance length: 0.58 metre (Extension pieces available)
Useful capacity: 4 litres
Flexible hose length: 2 x 1.3 metres
Seal material: Viton