Propex Heatsource HS2000 Heater Unit + Twin Outlet Vehicle Kit

The Propex Heatsource Heater HS2000 is a fully automatic, thermostatically controlled blown air heating system as a source of heat totally independent of the engine. The Propex Heatsource HS2000 heater comes with full easy to follow fitting instructions. If you enjoy all year use of your motorhome or campervan the Propex Heatsource Heater is your best choice. These Propex heaters just need a gas supply and 12 volt.

Each kit should contain enough parts to carry out an installation up to the connection to a 8mm or 5/16th gas pipe.

A twin outlet vehicle kit (V2) contains

2 x metres 60mm ducting
1 x 1 metre combustion inlet pipe
1 x 0.75 meter Stainless Steel Exhaust pipe
1 x Twin Dial Thermostat
3.5 metres thermostat wiring harness
3.5 metres 12v supply harness
1 x 'Y' Branch
1 x directional hot air outlet
1 x Open/Close vent
1 x directional cool air return vent
Hose clips, fasteners, screws, inline fuse, instructions, drilling template

The Propex Heatsource 2000 is fueled by Propane or Butane gas. Combustion is of the forced air type, using a fan to draw air from the outside. This is then passed into the combustion chamber, where it mixes with gas and is automatically ignited by a spark. Gas is switched electronically with a solenoid valve, the flow controlled by a jet and the spark supplied by a high voltage ignitor housed within the heater. Optional Digital timer available. Due to the design and efficiency of the stainless steel burner and heat exchanger, output is high, combustion is clean and all waste products are exhausted externally. Cabin air is usually re-circulated and drawn via the main fan, passed over the three surfaces of the heat exchanger and blown into the cabin through ducting and hot air outlets. Cabin air is totally sealed from exhaust gases. The unit is a room-sealed appliance and operates on propane or butane gas. Comprehensive installation kits supplied with each heater. Compact size high output heater. One of the quietest combustion heaters in production. Designed for reliable, maintenance free operation. Fast warm up time. Airflow sensing detects blocked or restricted flue pipes. Self-diagnostic fault finding with LED indication.

Special Features

Runs on clean burning propane or butane gas
Quiet thermostatic operation
Stainless steel burner and heat exchanger with clean combustion gives maintenance free durability
Low electrical current consumption
Compact and easy to install
Fast warm-up time
Reduces condensation
High quality motor with ball race bearings
Advanced micro-processor electronics
Self diagnostic fault finding system
Fully CE compliant and tested to the latest European standards

HS2000
Heat Input:	2.1kW
Heat Output:	1.9kW
Voltage:	12V
Current Consumption:	1.4A continuous running
Air Throughput:	60 C.F.M.
Fuel:	Butane or Propane Gas

Click Here for Propex Heatsource HS2000 Installation Manual