The Power Management System PMS3 is a 230 Volt AC mains and 12 Volt DC power control unit, providing all the necessary features or the control of the electrics in your caravan, campervan, motorhome or horsebox.

PMS3 Vertical Power Management System This PMS3 Vertical Power Management System is a mains and 12v DC power control unit, providing all the necessary features for the control of the electrics in your caravan, campervan, or motorhome.

Replacement power lead for all Cool freeze compressor driven cooler / freezers.

It is ideal if your cooling box has no AC connection, but you want to run it outside the vehicle: at home, in hotels, at campsites, or in holiday homes.

For connecting 12 V Electric Coolers and coolbags to 230 V AC mains supply

The ideal accessory for our TE coolers, allowing them to be mains powered. For maximum performance all TE coolers should be pre-cooled before use.

Dual charging caravan relay Charges refrigerator and auxiliary battery Instructions included E approved

The Apus Mains Roller is complete with 10M of cable, 3 sockets, 1.5 cable. The cable is contained on a practical roll up reel. Mains plug is easy to connect and CE approved. MCB protected with built in circuit breaker.

A general purpose control panel with built in battery gauge, widely used in the caravan/motorhome trade.

Plug-In Systems Battery Condition Meter Voltmeter This Plug-In Systems Battery Condition Meter Voltmeter is designed to monitor your car or caravan's batteries. It is ideally suited for installing in caravans which do not have any means of monitoring battery voltage.

Plug-In Systems Control Panel Car/Aux/Battery Meter This Plug-In Systems Control Panel Car/Aux/Battery Meter is a general purpose control panel with a built-in battery gauge, which is widely used in the motorhome trade. Comes complete with a wiring diagram for your convenience, as well as incorporating a 12V battery meter, a 3-way car/caravan change-over switch, and an aux on/off switch

Sargent EC160 Power Supply Unit. This Sargent EC160 Power Supply Unit is the ideal unit for a self-build campervan which provides both 12c and 240v power supplies. It is easy to install and operate courtesy of Sargent's simple design.

Sargent EC160 Power Supply Unit This Sargent EC160 Power Supply Unit is the ideal unit for a self-build campervan which provides both 12v and 240v power supplies. It is easy to install and operate courtesy of Sargent's simple design.

Sargent EC10 Battery Voltage Meter Digital Control Panel A general purpose battery voltage meter used in most campervan and caravan applications. Stylish and modern compact design.

Sargent EC20 Battery Voltage Gauge Digital Control Panel A general purpose battery voltage gauge used in most campervan and caravan applications. Stylish and modern compact design.

A general purpose electrical control panel used in most campervan and caravan applications. Stylish and modern compact design.

This Sargent EC160 Power Supply Unit is the ideal unit for a self-build campervan which provides both 12c and 240v power supplies. It is easy to install and operate courtesy of Sargent's simple design.

Sargent EC160 Power Supply Unit This Sargent EC160 Power Supply Unit is the ideal unit for a self-build campervan which provides both 12c and 240v power supplies. It is easy to install and operate courtesy of Sargent's simple design.

Powers mobile phones, laptops and small TVs. Automatic low-voltagealarm and shut-down. Battery and power LED display andoverload/over temperature warning and shut-down. Stores neatly inglove compartment.

These new Battery to Battery chargers from Sterling are proving every more popular. This device fast charges your batteries as you cruise along without the need for complex wiring, touching your alternator (voiding it's warranty) or tampering with the electronic control unit (ECU). It provides the onboard batteries with a fast 4 stage charging profile with very simple and speedy installation.

These new Battery to Battery chargers from Sterling are proving every more popular. This device fast charges your batteries as you cruise along without the need for complex wiring, touching your alternator (voiding it's warranty) or tampering with the electronic control unit (ECU).

12V 160A Alternator to Battery 4 step charger. Has two outputs and can be connected to optional remote control. Comes with two battery temp sensors Dimensions (H x W x D): 70 x 255 x280 mm Connections Type: 10mm studs and push fit terminals.

The battery charger/maintainer enables an extra battery bank to be kept 'topped up' from the main battery bank which has the charging device(s) connected to it

Versatile, compact and fully programmable battery charger, with a host of features, suitable for all common battery types including lithium. Voltage Input: 80-270v, AC, 40-70Hz Voltage Output: 12v (nominal) Current Output: 10Amp Number Of Outputs: 2 Dimensions (H x W x D)mm: 260 x 215 x 90 Weight:2kg Optional remote panel available, see pat number VS-346.

Versatile, compact and fully programmable battery charger, with a host of features, suitable for all common battery types including lithium.

Versatile, compact and fully programmable battery charger, with a host of features, suitable for all common battery types including lithium. Voltage Input: 80-270v, AC, 40-70Hz Voltage Output: 12v (nominal) Current Output: 30Amp Number Of Outputs: 3 Dimensions (H x W x D)mm: 260 x 215 x 90 Weight:2kg Optional remote panel available, see pat number VS-346.

Versatile, compact and fully programmable battery charger, with a host of features, suitable for all common battery types including lithium.

Pure sine wave inverters are ideal for running modern sensitive electrical appliances such as TV's, computers and small charger/power supplies. Twin outlet sockets. Adjustable earth bonding between centre tapped or neutral/earth. Continuous power: 1600w, Peak power: 3200w. Fuse recommended: 250A Low voltage alarm, low voltage trip, high voltage trip.

Pure sine wave inverters are ideal for running modern sensitive electrical appliances such as TV's, computers and small charger/power supplies. Twin outlet sockets. Adjustable earth bonding between centre tapped or neutral/earth.

Pure sine wave inverters are ideal for running modern sensitive electrical appliances such as TV's, computers and small charger/power supplies. Twin outlet sockets. Adjustable earth bonding between centre tapped or neutral/earth.

Quasi sine wave inverter 12V 150W continuous. Universal output socket, cigarette lighter style input plug. Overload, over voltage and low voltage cut-outs.

Can style Quasi Wave Inverter 12V 170W, complete with fan. Fits in cup holder or free standing Diameter (O/D): 64mm Length: 170mm Connections Type: Lighter plug Input, 13A UK mains / Euro socket outlet.

Quasi sine wave inverter 12V 1800W continuous. UK/Euro output sockets. Ring terminated cables on input. Overload, overvoltage and low voltage cut-outs. Remote control and cable included.

Quasi sine wave inverter 12V 350W continuous. UK/Euro output sockets. Ring terminated cables on input. Overload, over voltage and low voltage cut-outs.

Quasi sine wave inverter 12V 800W continuous. UK/Euro output sockets. Ring terminated cables on input. Overload, over voltage and low voltage cut-outs.

Pro-Combi S Pure Sine Wave Combined Inverter Charger. Inverter 12V 2500W. Charger 70A, 4-step digital. Comes complete with remote control panel and cable.

The ideal accessory for our TE coolers, allowing them to be mains powered. For maximum performance all TE coolers should be pre-cooled before use.

This Zig CF8 Charging & Distribution Control Panel System offers battery charging and 230v to 12v conversion with a battery (up to 4.5A continuously). Zig have designed new technology which means that there is automatic self re-setting, current overload, and thermal trip.

This Zig CF9 Charging & Distribution Control Panel System offers battery charging and 230v to 12v conversion with a battery (up to 4.5A continuously). Zig have designed new technology which means that there is automatic self re-setting, current overload, and thermal trip.

Zig X70 Battery Charger Transformer This Zig X70 Battery Charger Transformer is a lightweight, compact battery charger and power supply with a stabilized output for maximum efficiency and control.

Zig X80 16.5 Automatic Battery Charger This Zig X80 16.5 Automatic Battery Charger is an automated battery charger with a regulated stabilised output up to 13.8v, and up to 16.5A maximum.