Campervan Construction

This Stainless Steel Island Table Leg is perfect for use in your caravan, campervan, or motorhome's table setup. It is available in a variety of lengths to suit your particular table layout in your vehicle.

The Table Tops are made to order customized from 15mm lightweight plywood, hard laminated on both sides, and finished with a complimenting coloured edging. 

This make to order customized Walnut Wooden Table Top make fitting a table area into your caravan, motorhome, or campervan simple and straightforward.

Useful in kitchen and bathroom areas.

This Gas Drop Out Floor Vent is specifically designed for your motorhome, campervan, or caravan! We recommend at least 2 for your vehicle. - Tube length: 50mm - Tube diameter: 30mm - Flange diameter: 55mm

Round 80mm OD Tail Vent With Tail

These vents are complete with mosquito nets on rear. Aerator Dims: Air Flow: Diameter: A, B C 60mm 70 7 20mm 14cm2 (Can be used as the Sigma & Omega cooker hood 60mm grill vent).

Innovative and lightweight, space saving design, which folds down to a single fold leg thickness. The leg can be used singularly for a dinette, or as a pair for a free standing table.

This kit was designed so that the right angle table mounts are fixed to a panel at the required distance apart for the table to slot into. The turnbuttons are then mounted to hold the top of the table against the panel

The Fiamma Under Table Base connection is designed to be screwed onto the underside of the table top or to the floor. 

The Fiamma recessed table base is sunken into the floor of your campervan, caravan, motorhome or horsebox to support tables. 

Tube Pro table leg from Fiamma made of sturdy aluminium. This leg is an updated version of the previous model and painted with an oxidised effect to help make it more resistant. It is 70cm in length but can be reduced. The leg is provided with two plastic caps.

Used by many motorhome manufacturers as standard. To operate the leg use the slider to allow the leg to pivot. This leg is jointed in the middle.

New and unique style table leg system. Leg locks and twists in to position forming a very sturdy table support. No recessed hole is needed when fitting this system, making it a very simple and effective system.

Under table top base for use with Redwood table legs.

Under table base in black for use with Sequoia table leg.

New style table leg that means no more large holes need drilling into the floor. Enables virtually anybody to fit the leg anywhere in their vehicle or boat with absolute ease.

Folding table support brackets. These useful super strong brackets are capable of supporting heavy loads.

Folding table support brackets. These useful super strong brackets are capable of supporting heavy loads.

Mark III 7" Anodised silver coloured floor base for use with Sequoia table leg.

Black floor base for use with Redwood table legs, delivered complete with blanking cap.

Silver coloured floor base for use with Redwood table legs, delivered complete with blanking cap.