Bilge Pumps

filter Filter
Brand
Price
Showing 17 of 17 products
  • FLOAT SWITCH RULE-MATIC CW35

    FLOAT SWITCH RULE-MATIC CW35

    £29.90
    £28.99
    Rule-a-Matic mercury free float switch. Pump turns on when water level reaches 51mm (2"), turns off when water level drops to 19mm (3/4"). Removable base for easy installation and maintenance. Rating: 14 amps (max) Voltage Input: 12 Manufacturers Part Number: CW35.
  • FLOAT SWITCH WHALE (BE9002)

    FLOAT SWITCH WHALE (BE9002)

    £22.99
    The Whale Automatic Float Switch can be mounted either vertically or horizontally. It is maintenance free and the design prevents rapid on/off cycling. This switch is suitable for installations where amp draw is up to 15 amps. Dimensions: 55m(W) x 110mm(H) x 50mm(D).
  • FLOAT SWITCH WHALE ELECTRIC FIELD SENSOR

    FLOAT SWITCH WHALE ELECTRIC FIELD SENSOR

    £33.99
    The Whale Electric field float switch automatically senses water levels and will switch on the bilge pump. Automatically switches on when 2" of water is sensed and turns off when water drops below 1/2".
  • PUMP BILGE AUTO 12V 700GPH AAA 18051

    PUMP BILGE AUTO 12V 700GPH AAA 18051

    £41.99
    £39.99
    Automatic or manual, with integrated float switch. Dimensions: 110mm(H) x 80mm(W) x 110mm(D) Capacity: 700 gallons per hour, or 3182 litres per hour. Max head 4.6 metre Outlet: 3/4'' hosetail Fuse Requirement: 5 Amp Power Input: 2.9 Amp.
  • PUMP BILGE AUTO 24V 1500GPH AAA 18052-24

    PUMP BILGE AUTO 24V 1500GPH AAA 18052-24

    £59.90
    £54.99
    Automatic or manual, with integrated float switch. Dimensions: 110mm(H) x 80mm(W) x 110mm(D) Capacity: 1500 gallons per hour, or 6819.135 litres per hour. Max head 4.6 metre Outlet: 3/4'' hosetail Fuse Requirement: 5 Amp Power Input: 2.9 Amp.
  • PUMP BILGE AUTO 24V 700GPH AAA 18051-24

    PUMP BILGE AUTO 24V 700GPH AAA 18051-24

    £42.95
    £39.99
    Automatic or manual, with integrated float switch. Dimensions: 110mm(H) x 80mm(W) x 110mm(D) Capacity: 700 gallons per hour, or 3182 litres per hour. Max head 4.6 metre Outlet: 3/4'' hosetail Fuse Requirement: 5 Amp Power Input: 2.9 Amp.
  • PUMP RULE 500 12V

    PUMP RULE 500 12V

    £24.90
    £22.99
    Submersible bilge pump, ignition protected, high efficiency, low amp motor with stainless steel shaft. Will not burn out when run dry. Check Valve included for Back Flow Prevention, Vented body to prevent air locking. Threaded port for easier installation and maintenance.
  • PUMP RULE 800 12V

    PUMP RULE 800 12V

    £39.90
    £36.99
    Submersible bilge pump, ignition protected, high efficiency, with stainless steel shaft. Will not burn out when run dry
  • PUMP RULE MATE 1100 AUTOMATIC

    PUMP RULE MATE 1100 AUTOMATIC

    £109.00
    £100.99
    Fully automated submersible bilge pump, ignition protected, high efficiency, with stainless steel shaft. Solid state electronic water sensing technology that turns the pump on without the need for a float switch. Anti fouling impeller. Straight and 90 degree hose connection included.
  • PUMP RULE MATE 750 AUTOMATIC

    PUMP RULE MATE 750 AUTOMATIC

    £81.90
    £76.99
    Fully automated submersible bilge pump, ignition protected, high efficiency, with stainless steel shaft. Solid state electronic water sensing technology that turns the pump on without the need for a float switch. Anti fouling impeller.
  • RULE 02 1500 SUBMERSIBLE BILGE PUMP 12V

    RULE 02 1500 SUBMERSIBLE BILGE PUMP 12V

    £86.90
    £79.99
    Submersible bilge pump, ignition protected, high efficiency, with stainless steel shaft. Will not burn out when run dry Dimensions: 150mm high x 105mm diameter Outlet: 1'' hosetail Capacity: 1500 gph/5678 lph Fuse Requirement: 10 amp.