Pre-angled fibreglass poles maximise the space and headroom of the Fairfields awnings. Fitting snugly to host vehicles with a height of 180cm-210cm, it can be quickly and easily attached or detached to be left freestanding.

Inflatable Tempest drive-away awnings quickly add extra space and shelter to a campervan thanks to air tubes with two-layer protection and Air in/Air out valves. The Tempest provides a secure, snug fit and features large double front and rear doors with a lie-flat groundsheet for easy access.

A high specification awning offering versatility and function in a great value package. Quick and easy to set-up, the Motion AIR provides abundant head room and lots of useful space. Doors can be found on either side of the rear tunnel giving easy access to the vehicle and a large ‘D’ door connects the tunnel area to the living area.

The ideal drive-away awning for the smaller camper van. The Mini is ideal for touring as its compact dimensions make it quick and easy to set up and dismantle.

Designed to fit camper vans, the connecting tunnel has a convenient door for easy access. Two large windows, with roll down blinds, give a great view out and the large front door can be rolled to the side. The Trip AIR comes complete with a clip-in waterproof groundsheet that can be used if the site allows non-breathable groundsheets.

The traditional rail to attach Motor-home annexes to your vehicle. Length size 2.5M.

A pack of three quick release pole clamps, ideal for awnings with aluminium frames from 22 -25mm diameter. Easy to use, these clamps provide a unique double clamping mechanism, giving high lock strength, and make erecting and tensioning your awning a breeze.

A pack of three quick release pole clamps, ideal for awnings with steel frames from 22 -25mm diameter. Easy to use, these clamps provide a unique double clamping mechanism, giving high lock strength, and make erecting and tensioning your awning a breeze.

Reduce the draughts in your awning with this quick and easy to fit kit. W4 figure 8 and suckers ensure a neat result without drilling or screwing into the caravan wall. Double for axle.

Reduce the draughts in your awning with this quick and easy to fit kit. W4 figure 8 and suckers ensure a neat result without drilling or screwing into the caravan wall. Suitable for single axle.

This Blue Diamond 6mm Awning Piping is a 6mm awning piping to provide a drive-away option for awning when used in conjunction with a figure of 8 connector. Please note that it is sold by the metre in a continuous length.

Glow in the dark heavy duty pegs. World of Camping recommend these pegs to use on hard difficult ground. No need to worry about tripping over them in the dark!

Glow in the dark heavy duty pegs. World of Camping recommend these pegs to use on hard difficult ground. No need to worry about tripping over them in the dark! Ideal for hard ground.

This Blue Diamond Draught Skirt is a grey plastic draught for awnings and porches. The top edge has a 6mm beading to fit into the awning channel on the bottom of the caravan side.

These Blue Diamond Orange Hard Ground Pro 20 Pegs are ideal for hard ground. Featuring a steel composition with an orange nylon head, they come packaged in a convenient carry box.

This Blue Diamond Peg Jar Groundsheet Pegs is a useful jar in which you can store all of your tent pegs. Comes complete with 20 x 23cm plastic pegs, 10 x 9cm groundsheet pegs, and a peg extractor tool.

These Blue Diamond Pile Driver Pro 20 Hard Ground Pegs are ideal for hard ground as they are thick, steel pegs with corkscrewed shafts for extra grip.

Blue Diamond Hard Ground Pro Pegs 20's With Free Case Recycled plastic case & peg top that can be recycled again and again Tough plastic hook Fantastic on grass & hard standing

This penetrating water-based sealant is formulated to be so thin that by using capillary action it can find its way INSIDE fine cracks and set to a CLEAR flexible seal

Tent repair kit, Coleman brand kit, contains 2 adhesive patches, 2 mesh screen patches, 2 spools nylon thread, 1 needle, 3 tent pole ferrels, Shock cord, Seam seal, REsealable bag.

This Combi Rail is a combination gutter and awning rail designed specifically for VW T4 & T5 LWB vans.

This Combi Rail is a combination gutter and awning rail designed specifically for VW T4 & T5 SWB vans. This particular version is for fitting to the LH or RH side of the vehicle and comes with front and rear LH or RH end caps included as part of the kit.

Continental 10 Pegs - 18cm for tents or awnings

A versatile freestanding tunnel design, Shamrock has pre-angled fibreglass poles plus interior steel poles for stability and tent fabric tension. With standing headroom, four curtained windows, a large front door that can be set up as extra shelter, large rear door, large side air vents, front vents plus a full-size toggle-up groundsheet, it’s a very practical awning for motor touring.

The wall to wall carpet is made from a soft flannel to provide your tent with the ultimate cosy feeling making you feel completely at home.

This handy footprint will keep the groundsheet of your tent clean and help protect it from abrasion and damage.

Easily inflated via two air tubes with two-layer protection and Air in/Air out valves, the Hurricane drive-away awning offers versatile extra space and shelter. Quick and secure to attach snugly, the deep front canopy over twin air vents extends protection of the front door.

With an updated shape the fully-enclosed Palmdale 500 awning offers substantial extra living space for the Palmdale 500 tent that matches the colour, fabric and design.

A compact instant pitching dome design for extra living space, Spokane has a click-into-place freestanding steel pole frame with push button release for reliable erection and packing away. With standing headroom, five curtained windows, front and rear doors and a sewn-in groundsheet, it’s a practical awning for touring.

The Wimberly Inner Tent is a spacious inner tent that comfortably sleeps two making for a comfortable night's sleep. Fitting either side of the awning, it's a easy to attach addition allowing you to provide sectioning within your Wimberly drive away awning. 

Mounting bracket kit for Fiamma F35 Awning. For use in conjunction with the Vamoose combi rails that we list. The bracket is fully adjustable so you can raise the height of the awning. Perfect in the case of some vehicles such as the Ford Transit Custom which has a door that rises when you slide it back, known to hit the arms on awnings in normal circumstances.

These can be installed on vw t4, t5, t6, transporters ( all variants ) mercedes vito, peugeot, citroen, fiat, toyota, renault and especially useful when installing on the new ford custom to combat the raising sliding side door issue.

The Fiamma LED Awning Light is an external LED light for Fiamma awnings. Robust construction using solid painted aluminium. It includes 31 LED lamps with intense white light that doesn't create unpleasant heat.

1 Piece 300cm bracket Fiamma number 98655-503

Adapter Eura Mobil Karmann 350 cm, 400 cm or 450 cm.

After 2005 model. 3 x 15cm brackets. Fiamma number 98655-698.

VW T4 F45-F35, 2pcs, 8cm brackets.

2 x 50cm brackets. 2 x 30cm brackets. Fiamma number 98655-921.

3 x 25cm brackets. Fiamma number 98655-857.

Fits Ducato, Jumper & Boxer After 2006 (High Roof Super Long) Length 6363mm. 2 Pieces, 26cm brackets. 1 Piece, 12cm bracket. No drilling required. Fiamma number 98655-904.

Kit Eriba Touring 2 pcs 8cm brackets.

Fits Ducato, Jumper or Boxer High Roof models after March 06/2006. 2 x 20cm Brackets with closing rubber joints. 1 x 12cm bracket. No drilling required. Complete with rain guard. Fiamma number 98655-745

Fits Ducato, Jumper or Boxer High Roof models after March 06/2006. 2 x 20cm Brackets with closing rubber joints. 1 x 12cm bracket. No drilling required. Complete with rain guard. Fiamma number 98655-745.

Fits Ducato, Jumper or Boxer High Roof models after 1994 before 06/2006. 2 Pieces. 20cm Brackets with closing rubber joints. No drilling required. Fiamma number 98655-373.

Fits Ducato, Jumper or Boxer High Roof models after 1994 before 06/2006. 2 Pieces. 20cm Brackets with closing rubber joints. No drilling required. Fiamma number 98655-693. 

2 pcs. 12cm brackets.

For Genetics / Graal. 3 x 15cm brackets. Fiamma number 98655-725.

Fits Iveco Daily H2 model. 2 Pieces, 15cm brackets. 1 Piece, 20cm bracket. Fiamma number 98655-733.

Fits Mercedes Sprinter High Roof (Also for VW Crafter). 1 Piece, 60cm bracket. 1 Piece, 53cm bracket. 1 Piece, 12cm bracket . Fiamma number 98655-889.

Fits Mercedes Sprinter High Roof (Also for VW Crafter). 1 Piece, 60cm bracket. 1 Piece, 53cm bracket. 1 Piece, 12cm bracket. Fiamma number 98655-746.

Fits Renault Master. 2 Pieces, 29cm brackets. 1 Piece, 12cm bracket. Fiamma number 98655-468.

Fits Renault Master After 2010. 1 x 12cm bracket. 1 x 44cm bracket. 1 x 64cm bracket. Fiamma number 98655-881.

Ideal for adding additional mounting brackets to secure Fiamma awnings.

Motorhome awning installation bracket for F45 and Fiamma Zip awnings. Additional 1 piece bracket for awnings from 450 - 550 cm long.

Fits Mercedes Sprinter After 2006 With Roof Rail. 2 x 40cm bracket. 1 x 12cm bracket. Fiamma number 98655-772.

3 x 20cm brackets. Fiamma number 98655-855.

Adapter Mercedes Sprinter High Roof F65 Eagle 400 - Version for Right Hand Drive 98655Z010

1 Piece 300cm bracket Fiamma number 98655-503

1 Piece 400 cm bracket Fiamma number 98655-505

Adapter Rapido Serie 90dF - 9M - 10 for 350 cm, 400 cm & 450 cm.

1pc. 390cm bracket.

Rail-style adapter bracket kit for Fiamma winch awnings. 1 Piece 300cm Rail or 1 Piece 400cm Rail

2 x 30cm brackets. 2 x 50cm brackets. Fiamma number 98655-628.

The Fiamma Rafter LED lighting system is composed of 4 light strips, 2 light strips per awning arm. Light strips consist of 9 LED lights, providing 36 LED's in total.

Wind open and close your Fiamma awning with this lightweight and effective crank handle. Available in three sizes.

For installation on roof rails. 2 Pieces. 8cm Brackets. Fiamma number 98655-310

Fiamma Kit Adapter Elddis - F65. 1 x 370cm bracket. 1 x 400cm bracket

3 x 15cm brackets. Fiamma number 98655-420.

The Fiamma Rain Guard is a convenient rubber guard to seal the space between the awning and the vehicle wall to prevent water from infiltrating. The Kit Rain Guard F65 is for roof awnings F65S and F65L.

Designed for campervans, the Fiamma Kit Rain Guard Van is handy yet durable rain rubber guard which conveniently seals the space between the awning and vehicle wall to prevent and limit water infiltration! This Rain Guard kit has been designed for F45s and F35 Pro awnings.

Only Fiamma offers you the optional 12V Motor Kit that can be installed on your Fiamma awning even after mounting. The standard Motor Kit extends the total length of the awning to about 13 cm, while the integrated Motor Kit doesn’t increase the total length of the awning.

Secure your awning, enclosure, privacy room, or mat with this deluxe awning peg kit. Made of tough UV-resistant plastic, these awning pegs are lighter than standard metallic screwws and have a higher resistance against soft and sandy grounds thanks to the new spiral design.

The Fiamma Rain Guard is a convenient rubber guard to seal the space between the awning and the vehicle wall to prevent water from infiltrating.

The Fiamma Rain Guard Lower is a convenient guard sealing the lower space between the awning and the vehicle wall to prevent water from coming in. Perfect for F45S awnings with suspended installation spaced from the wall.

The Rain Guard M 4cm is designed for awnings mounted with adapter spaced out from the wall (up to 4cm) or on curved walls. Sold by the metre.

The Fiamma Rain Guard S is a convenient rubber guard to seal the space between the Fiammastor and the vehicle wall to prevent water from infiltrating. It is installed to the case without removing the awning.

The Fiamma Awning Valance Shade slides easily into the roller guide of your Fiamma awning lead bar.

Optional spoiler for Fiamma awnings with an exclusive design to reduce wind resistance and also improve the aesthetics of the vehicle. It can be attached on the right or the left side.

The Fiamma Skirting provides protection against wind and rain that eliminates draught. Suitable for use with all privacy rooms, the awning skirting kit is easily shortened, providing you with an exact fit for your motorhome, caravan or campervan.

Full length 4.5M long bracket for use on Burstner vehicles.

Fiamma Caravanstore / XL Caravan Awning is available in sizes 190, 225, 255, 280, 310, 360, 410, 440, XL280, XL310, XL410, XL440, XL500, XL550 & XL 310 Black, XL 360 Black, XL 410 Black with canopy colours in Royal Blue or Royal Grey.

The Fiamma Caravanstore Support Leg is a Reinforced leg developed to be fixed to the front roller of the Caravanstore to increase resistance and solidity of the structure. Standard delivered with Caravanstore 440 and Caravanstore ZIP 360 to 440

Fiamma Caravanstore Zip XL Awning & Enclosure is available in sizes 280 XL, 310 XL, 360 XL, 410 XL, 440 XL, 500 XL, 550 XL with canopy colours in Royal Blue or Royal Grey.

CS Light Privacy room adapter kit for F35 PRO.

This Fiamma Tension Rafter Pro is made of two sturdy anodised aluminium telescopic bars, keeping the fabric tight and eliminating water pooling from rain and any noisy flapping in the wind.

Vertical telescopic pole in anodized aluminium for the front panel allowing increased stability when the door is kept open. New version for Fiamma F65 S and F65 L.

A vertical telescopic pole for Zip awnings and Fiamma Privacy Rooms, designed to reinforce the front panel.

The Fiamma Drip Stop gutter helps eliminate black streaks on your motorhome or caravan. The Drip Stop is made in wide-base flexible polyvinyl, with an adhesive acrylic foam strip of superior quality and adherence with reinforced aluminium strips that guarantee long life and hold to your vehicle over time. Easy to install with an added UV-ray proof guard.

The Drip-Stop gutter prevents black streaks on your motorhome or caravan, and it is made from wide-base flexible polyvinyl.

The Drip-Stop gutter prevents black streaks on your motorhome or caravan, and it is made from wide-base flexible polyvinyl.

Fits VWT5 Multivan Transporter

For installation on roof rails. 2 Pieces. 8cm Brackets. Fiamma number 98655-142

Adapter kit for fitting a Fiamma F35 Pro awning onto a VWT5 or VWT6 Multirail Reimo.

Fits Renault Trafic / Opel Vivaro / Nissan Primastar. After 2015 Models. For SWB vans install Fiamma F35 220 awning. For LWB vans install Fiamma F35 250 awning. 2 Pieces. 12cm Brackets Fiamma number 98655Z020

Fits Renault Trafic / Opel Vivaro / Nissan Primastar. After 2001 before 2014. For SWB vans install Fiamma F35 220 awning. For LWB vans install Fiamma F35 250 awning. 2 Pieces. 12cm Brackets. Fiamma number 98655-893.

Fits Mercedes Vito Before 2004. 2 Pieces. 8cm Brackets. Fiamma number 98655-682.

Fits VWT3, 2 Pieces, 8cm Brackets, Fiamma number 98655-114

Fits VW T4 Lift Roof. 2 Pieces. 8cm Brackets. Fiamma number 98655-111.

Fits VWT5 California. 2 Pieces. 8cm Brackets. Fiamma number 98655-748.

Fits VWT5 Multivan Transporter, 2 Pieces, 12cm Brackets, Fiamma number 98655-747